Grillo Documentation
Install Grillo sensors, connect them, and work with their data in Grillo Cloud.
Grillo Pulse
Seismic sensor with a geophone and accelerometer, on cellular or Ethernet. Inspect, claim, connect, install, and verify.
Start the Pulse guide →Grillo One
Open-source strong-motion sensor on Ethernet or Wi-Fi. Connect it to your network and mount it.
Start the One guide →Grillo Slide
GNSS base and rovers for landslide monitoring. Fit the SIM, set the APN with the app, and install on site.
Start the Slide guide →Grillo Cloud
Claim your Pulse and One sensors, check their health, and update firmware. Record triggers in structures, download waveforms, or detect earthquakes, depending on your plan.
Open the Grillo Cloud guide →Grillo Cloud for Slide
Read ground movement and device health from your Slide kits, and export the data.
Open the Slide dashboard guide →New sensor checklist
Grillo Pulse and Grillo One
- Get a Grillo Cloud account from your project invitation.
- Claim the sensor with its 12-character Device ID or the QR code on its label.
- Follow the hardware guide for your sensor: Pulse or One.
- Verify that it is online in the sensor list.
Grillo Slide
- Fit the SIM and set the APN on the base.
- Install the devices on site and let the base survey its position.
- Check the first readings at slide.grillo.io.
:::warning Check power before you connect a Pulse Grillo Pulse runs from a 12 V DC supply. It cannot be powered from USB, and a powered USB cable can damage it. Contact Grillo Support if the supplied accessories do not match your order. :::
Need help?
Use the chat messenger on this site, read the FAQ, or contact Grillo Support.